2001 Mitsubishi Unknown

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill back (5.3.6 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Brake pipe corroded, covered in grease or other material all pipes (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced whole underside of vehicle also been undersealed (6.1.1 (c) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Wheel arch (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced behind wheel arch (6.1.1 (c) (i))

Rear Exhaust System Corroded

Underside of Vehicle Has been Undersealed

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Central Rear Seat belt buckle not functioning as intended (7.1.2 (d))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area and r/o/s above a suspension link inner mounting (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Offside Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Front Exhaust mounting defective (6.1.2 (a))

f/n/s abs sensor wiring insecure

f/o/s abs sensor securing bolt missing

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner arch (6.2.2 (d) (i))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner arch (6.2.2 (d) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner arch (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner arch (6.2.2 (d) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

both side sills covered with plastic cover

front too rear floor and chassis coveredwith underseal

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Front Registration plate incorrect (0.1 (c))

Horn not working (7.7 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Registration plate incorrect (0.1 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner arch (6.2.2 (d) (i))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner arch (6.2.2 (d) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner arch (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner arch (6.2.2 (d) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

both side sills covered with plastic cover

front too rear floor and chassis coveredwith underseal