2008 Mazda Bongo

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill x4 (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill x2 (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Emissions unable to be completed (8.2.1.2 (d))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Emissions not tested large exhaust leak (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases Rear silencer has a large hole in the top (6.1.2 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Rear fog lamp switch inoperative (4.5.3 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Front Service brake excessively binding (1.2.1 (f))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front tyre deep cracks in outer wall

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear tyre deep cracks in outer wall

Offside Front tyre deep cracks in outer wall

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear tyre deep cracks in outer wall

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Parking brake lever has no reserve travel (3.1.6b)

Rear Lower Exhaust has a major leak of exhaust gases (7.1.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Oil leak

surface cracks o/s and n/s front o/s and n/s rear tyres

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Oil leak

surface cracks o/s and n/s front o/s and n/s rear tyres

Nearside rear brake juddering severely (3.7.A.5b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Parking brake lever has little reserve travel (3.1.6b)

all 4 tyres cut but not to cords

Oil leak

both rear tyres perished

undertrays fitted

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Oil leak

both rear tyres perished

undertrays fitted

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Outer Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Outer Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Outer Front Brake pad(s) wearing thin (3.5.1g)

Nearside Registration plate lamp not working (1.1.5c)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Outer Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear fog lamp not working (1.3.2b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)