1999 Aprilia SR125

Drive chain slightly loose (6.1.7 (c) (i))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front position lamp deteriorated but function not impaired (1.1.1b)

Front suspension has a slightly reduced damping effect (2.3.6c)

Nearside rider peg pivot worn but not excessive.

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Front position lamp deteriorated but function not impaired (1.1.1b)

Front suspension has a slightly reduced damping effect (2.3.6c)

Nearside rider peg pivot worn but not excessive.

Rear mono-shock pivot worn but not excessive (2.4.B.4)

Rear suspension bearing has slight free play (2.4.A2a(i))

Rear Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Drive chain worn to excess (6.2.1e)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)