1999 Yamaha TDM850

Central Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Offside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Central Front Brake pad(s) contaminated (1.1.13 (b))

Central Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Central Front Headlamp incorrect colour (4.1.4 (a))

Central Front Shock absorber has a serious fluid leak (5.3.2 (b))

Central Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Offside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Central Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Central Front Shock absorber has a light misting of oil (5.3.2 (b))

Nearside Front Lower Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Lower Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Upper Headlamp aim too high (1.6)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Nearside Front Brake disc(s) slightly pitted (3.2.A1l)

Offside Rear Brake disc(s) excessively pitted (3.2.A1l)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Nearside Front Brake disc(s) slightly pitted (3.2.A1l)

Front wheel bearings have excessive free play (2.3.5b)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Front Brake disc(s) has slight run out (3.2.A1m)

Front Brake disc(s) slightly worn (3.2.A1l)

Front suspension assembly slightly corroded. (2.3.1)

Rear Brake disc(s) has slight run out (3.2.A1m)

Rear Brake disc(s) slightly worn (3.2.A1l)

Steering control has reduced clearance at full lock not affecting the riders grasp of handlebars (2.1.2b)

Steering movement slightly rough. (2.2.1a)

Wheel alignment slightly misaligned. (2.5.1)

Front Brake lever pivots slightly worn (3.1.3a)

Motorcycle structure slightly corroded (6.1.1a)

Rear Roller brake test indicates a slightly juddering brake (3.3.A1b)

Front Brake lever pivots slightly worn (3.1.3a)

Front position lamp incorrect colour (1.1.2a)

Motorcycle structure slightly corroded (6.1.1a)

Rear Roller brake test indicates a slightly juddering brake (3.3.A1b)

Front Brake disc(s) slightly pitted (3.2.A1l)

Front Brake lever pivots excessively worn (3.1.3a)

Rear Brake disc(s) is excessively distorted (3.2.A1m)

Rear Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Steering control has Insufficient clearance at full lock affecting the riders operation of the controls (2.1.2b)

Brake component is slightly corroded (3.1.5)