2013 Audi A1

Brake hose has slight corrosion to ferrule All (1.1.12 (f) (i))

Front Sub-frame corroded but not seriously weakened Subframe condition deteriorating should be monitored (5.3.3 (b) (i))

Power steering pipe/hose slightly corroded N/S front (2.1.5 (g) (i))

Rear Both o/s and n/s shock absorbers becoming corroded.

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Headlamp aim too high (4.1.2 (a))

Offside Front Coil spring missing (5.3.1 (c) (i))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Rear Brake lever has restricted free movement Parkbrake on caliper. (1.1.15 (e))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake hose has slight corrosion to ferrule All (1.1.12 (f) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Both o/s and n/s shock absorbers becoming corroded.

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Headlamp aim too high (4.1.2 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Service brake binding but not excessively both sides (1.2.1 (f))

middle exhaust clamp missing

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Service brake lagging in operation 38% (1.2.1 (d))

Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides pitted inner surface (1.1.14 (a) (ii))

Windscreen wiper blade defective both deteriorated (3.4 (b) (i))

Brake disc worn, pitted or scored, but not seriously weakened all front and rear discs have light corrosion/pitting (1.1.14 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Undertray not fully secure (8.1.1 (b) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

exhaust heat shield loose

Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Service brake excessively fluctuating (1.2.1 (e))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Tyre slightly damaged/cracking or perishing n/s and o/s (5.2.3 (d) (ii))

Nearside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 28% (3.7.B.5b)