2003 Yamaha XJ600

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

headlamp flash not working

slight lack of damping, rear shock

swing arm and rear of frame slightly corroded

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

slight lack of damping rear shock

Front Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Rear suspension slightly corroded swingarm rusted. (2.4.A.2d)

Brake lever is bent but brake can still be readily applied (3.1.3c)

headlamp beam corrector fitted

headlamp flash not working

Headlamp masks/converters fitted

Rear position lamp damaged but function not impaired (1.1.1b)

Brake lever is bent but brake can still be readily applied (3.1.3c)

CENTRE STAND SLIGHTLY UNSTABLE

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Wheel alignment incorrect which adversely affects the handling (2.5.1)

CENTRE STAND SLIGHTLY UNSTABLE

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Front Brake lever has inadequate reserve travel (3.1.3b)

Front Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Front Exhaust is leaking and excessively noisey (7.1.1b)

Front Headlamp aim beam image kick up to the offside (1.6)