2015 Mazda Bongo

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill by rear bumper (6.1.1 (c) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill by rear bumper (6.1.1 (c) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively damaged significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively damaged significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Both side front inner brake disc in poor condition

Brake hose has slight corrosion to ferrule both side front & rear (1.1.12 (f) (i))

Nearside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside front inner sill corroded

Nearside rear inner sill corroded

Offside Front Outer Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Oil leak but not excessive

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Tyre slightly damaged/cracking or perishing both side (5.2.3 (d) (ii))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Outer Tyre slightly damaged side wall (5.2.3 (d) (ii))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Inner Subframe mounting prescribed area is corroded but not considered excessive inner side sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive outer side sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Central exhaust slightly corroded

Oil leak, but not excessive very slight oil leak (8.4.1 (a) (i))

Front Windscreen washer not working (3.5 (a))

Central exhaust slightly corroded

Oil leak, but not excessive very slight oil leak (8.4.1 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front most (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front most (5.3.4 (a) (i))

headlamp condition

Nearside Front Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)