MOT Status
ExpiredMileage
31,118 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake hose bulging under pressure Both (1.1.12 (d))
Offside Front Lower Suspension arm fractured Holed at front bolt (5.3.3 (b) (ii)) DANGEROUS
Front Brake pipe corroded, covered in grease or other material Both (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Corroded and rear bush split (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Suspension component corroded but not seriously weakened All underside heavily corroded (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced At both sills, front parts of chassis and rear near towbar (6.1.1 (c) (i))
Front Brake hose has slight corrosion to ferrule Both (1.1.12 (f) (i))
Front Brake pipe corroded, covered in grease or other material Both (1.1.11 (c))
Front Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear coolant pipes corroded
Suspension component corroded but not seriously weakened All underside (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced NS sill + OS sill (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill holed near rear axle mount (5.3.6 (a) (i))
Front Brake hose has slight corrosion to ferrule Both (1.1.12 (f) (i))
Front Brake pipe corroded, covered in grease or other material Both (1.1.11 (c))
Front Headlamp has a product on the lens but not seriously reducing light output Both (4.1.4 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear coolant pipes corroded
Suspension component corroded but not seriously weakened All underside (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced NS sill + OS sill (6.1.1 (c) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis leg (6.1.1 (c) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced chassis leg (6.1.1 (c) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
front subframe corroded
Nearside Rear Integral body structure is fractured and structural rigidity is significantly reduced outer sill (6.1.1 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
front subframe corroded
BOOT FULL NOT ALLOWING A FULL INSPECTION OF REAR BELTS TO BE CARRIED OUT
Brake hose has slight corrosion to ferrule ALL (1.1.12 (f) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pipe corroded, covered in grease or other material BOTH (1.1.11 (c))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced ALL (6.1.1 (c) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' small fracture at the base of windscreen (8.3.1d)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Nearside Rear boot contents don't allow a full check of the seat belt
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Vehicle structure has slight corrosion chassis leg (6.1.A.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' small fracture at the base of windscreen (8.3.1d)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Nearside Rear boot contents don't allow a full check of the seat belt
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Vehicle structure has slight corrosion chassis leg (6.1.A.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill and inner wheel arch (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe excessively corroded brake hose to wheel cylinder (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill and inner wheel arch (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pipe slightly corroded to wheel cylinder (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe slightly corroded to wheel cylinder (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (2.4.A.3)
Nearside Headlamp aim too low (1.8)
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
front brake discs in poor condition
Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear coil spring broken (2.4.C.1a)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
exhaust heat shield loose
front brake discs in poor condition
Brake pipe slightly corroded (3.6.B.2c)
front brake discs slightly corroded on inside
Front brake disc slightly pitted (3.5.1h)
Front brake disc slightly pitted (3.5.1h)
How Reliable is the Mazda MPV?
Based on 44,611 MOT tests across 3,157 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SN02 YLL is a 2002 Mazda MPV in Green with a 1,991cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 70.8%.
Across all 2002 Mazda MPV models, the average MOT pass rate is 69.8% with a typical mileage of 79,256 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda MPV fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,975 recorded failures. If you're considering buying SN02 YLL, it's worth having these areas checked by a mechanic before committing.
The Mazda MPV typically stays on UK roads for around 31 years. At 24 years old, this Mazda MPV is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SN02 YLL?
You can check the full history of SN02 YLL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SN02 YLL registered?
SN02 YLL is a 2002 Mazda MPV, first registered on 22 April 2002.
Is SN02 YLL safe to buy?
The MOT history for SN02 YLL shows 24 tests with a 70.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SN02 YLL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SN02 YLL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.