2007 Cagiva Raptor

Head light mask convertor fitted at time of test.

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Front Brake binding but not excessively (1.2.1 (f))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Position lamp not working (4.2.1 (a))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Vehicle identification number not displayed (0.2 (a))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Exhaust fowling rear suspension arm.

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Drive chain slightly loose (6.2.1d)

Front Brake disc(s) is slightly distorted (3.2.A1m)

Drive chain slightly loose (6.2.1d)

Front Brake disc(s) is slightly distorted (3.2.A1m)

Nearside Front Direction indicators not working (1.5.1c)

Offside Front Direction indicators not working (1.5.1c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Drive chain slightly loose (6.2.1d)

Offside Rear Direction indicators not working (1.5.1c)

Drive chain slightly loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pedal has inadequate reserve travel (3.1.3b)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Clutch lever bent (6.2.1g)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear shock absorber has a light misting (2.4.A.1c)

exhaust rubbing on swingarm

Brake linkage has abnormal movement due to excessive wear (3.2.A1i)

Drive chain worn to excess (6.2.1e)

Front Stop lamp remains on when the brake is released (1.3.1e)

Handlebar deformed (2.1.1b)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear wheel bearings have excessive free play (2.4.A.2c)

Front wheel bearings are slightly rough (2.3.5b)