MOT Status
ExpiredMileage
88,255 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
offside rear service brake performance lower than nearside
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Suspension arm severely distorted (2.4.G.1)
Offside Rear fog lamp not working (1.3.2b)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)
Brakes imbalanced across an axle (3.7.B.5b)
Centre Parking brake lever has no reserve travel (3.1.6b)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.5c)
Nearside Road wheel bead rim badly distorted (4.2.A.1a)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear An item not tested (Manual)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear fog lamp not working (1.3.2b)
Offside Rear rear brake binding (3.7.B.1)
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Suspension arm slightly distorted (2.4.G.1)
Offside Front front brake juddering slightly (3.7.A.2b)
advise front bumper condition
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear fog lamp not working (1.3.2b)
Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
n/s front lower arm bush starting to split
Front Exhaust system not adequately supported (7.1.1)
Front Upper Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Parking brake: efficiency below requirements (3.7.D.4)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)
Nearside Rear Road wheel bead rim badly distorted (4.2.A.1a)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Parking brake: efficiency below requirements (3.7.D.4)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
S777 BEL is a 2000 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 11 MOT tests with a personal pass rate of 45.5%.
Across all 2000 Ford Ka models, the average MOT pass rate is 62.2% with a typical mileage of 56,069 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying S777 BEL, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 26 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of S777 BEL?
You can check the full history of S777 BEL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was S777 BEL registered?
S777 BEL is a 2000 Ford Ka, first registered on 27 January 2000.
Is S777 BEL safe to buy?
The MOT history for S777 BEL shows 11 tests with a 45.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does S777 BEL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on S777 BEL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.