2005 Yamaha Ttr 250

Offside Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

all lights not fitted or have been removed permanently disconnected painted over or masked

Offside Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

all lights not fitted or have been removed permanently disconnected painted over or masked

Horn sound not in accordance with requirements (7.7 (c))

Offside Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

all lights not fitted or have been removed permanently disconnected painted over or masked

Rear Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

severe oil leak

Front Brake disc(s) cracked (3.2.A1g)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front wheel bearings have slight free play (2.3.5b)

severe oil leak

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front wheel bearings have slight free play (2.3.5b)

Lower Rear suspension bush has slight free play shocker bush (2.4.A2a(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Brake lever is short but brake can still be readily applied (3.1.3c)

Front wheel bearings are slightly rough (2.3.5b)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear wheel spindle securing nut locking device missing (2.4.A.2b)

Brake lever is short but brake can still be readily applied (3.1.3c)

Front wheel bearings are slightly rough (2.3.5b)

Rear Tyre is unsuitable (4.1.1)

Headlamp aim too low (1.6)

Direction indicators not working (1.5.1c)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))