2000 Honda S2000

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Lower Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill in several places (7.1.1 (a) (i))

Offside Front Outer Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Outer Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Items removed from driver's view prior to test ()

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Tyre slightly damaged run flat (5.2.3 (d) (ii))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Tyre slightly damaged run flat (5.2.3 (d) (ii))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Road wheel fixing missing (5.2.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

Offside Front Windscreen damaged and affecting the driver's view of the road in zone a swept area (3.2 (a) (ii))

Offside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Headlamp aim too high (4.1.2 (a))

Offside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre worn close to the legal limit outer edge (205/55/16 continental) (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

rear brakes binding slightly

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Coolant leak

engine warning light on

Front Brake pad(s) wearing thin (3.5.1g)

Nail in nearside rear tyre

Nail in offside front tyre

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nail in nearside rear tyre

Nail in offside front tyre

battery flat

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

battery flat