2000 Honda S2000

Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Outer sill

Offside Rear Outer sill

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Brake performance unable to be tested (1.2.1 (g))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive inner and outer (7.1.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension rod damaged but not seriously weakened (5.3.3 (b) (i))

Rear Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Anti-roll bar linkage corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush starting to come unbonded (5.3.4 (a) (i))

Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material slightly corroded along side petrol tank (1.1.11 (c))

Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material slightly corroded along side petrol tank (1.1.11 (c))

Offside Rear Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Windscreen damaged but not adversely affecting driver's view chip in nearside (3.2 (a) (i))

Windscreen damaged but not adversely affecting driver's view chip in offside (3.2 (a) (i))

2 rear tyres close to legal limit

Nearside Front minimum play at track rod end

Offside Rear brake bind

rusty underside

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Anti-roll bar insecure (2.4.G.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Centre Upper Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Lower Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside rear brake binding (3.7.B.1)

Offside rear brake binding (3.7.B.1)

Centre Upper Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Lower Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

front tyres worn on inner edges