1998 Kymco Zing

Clutch lever bent (6.2.7 (b))

Rear Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Steering headbearing has slight free play (2.2.2 (f) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Wheel alignment slightly misaligned (2.4 (a))

Central Rear reflector missing (4.8.2 (a) (ii))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Fuel cap ineffective (6.1.3 (b) (i))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS

Riders seat insecure (6.2.5 (a) (ii)) DANGEROUS

Clutch lever bent (6.2.7 (b))

Rear Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Steering headbearing has slight free play (2.2.2 (f) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Wheel alignment slightly misaligned (2.4 (a))

Drive chain lightly rubbing on a rubber guide (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel spoke slightly corroded. (4.2.1b)

handle bars are bent but not affecting steering

Front Brake lever has inadequate reserve travel (3.1.3b)

Rear Brake reaction bracket securing bolt(s) missing no lock pin fitted (3.2.A1j)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain lightly rubbing on a rubber guide (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Headlamp aim too high (1.6)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel spoke slightly corroded. (4.2.1b)

handle bars rear bent not affecting steering