2005 Yamaha TT250R

Drive chain sprocket worn, but not excessively Both (6.1.7 (c) (i))

Suspension arm pin, bush or joint worn but not resulting in excessive movement Rear linkage bearings worn (5.3.4 (a) (i))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Wheel spoke slightly loose (5.2.2 (d))

Horn not working (7.7 (a))

Horn sound not in accordance with requirements (7.7 (c))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Wheel spoke slightly loose (5.2.2 (d))

Rear Wheel spindle locking device missing (5.2.1 (d))

Chain guard missing

Drive chain slightly loose (6.2.1d)

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Front Wheel spoke excessively loose (4.2.1b)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Rear reflector on motorcycle missing (1.4.1)

Rear suspension bearing has slight free play (2.4.A2a(i))

Registration plate characters incorrectly spaced (6.3.4a)

Registration plate characters laid out in an incorrect format (6.3.4f)

Registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate with character(s) which are not the correct stroke width (6.3.4a)

Registration plate with character(s) which are not the correct width (6.3.4a)

Rear suspension bearing has slight free play (2.4.A2a(i))

Brake lever is short but brake can still be readily applied (3.1.3c)

Clutch lever shortened. (6.2.1g)

Registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate with character(s) which are not the correct width (6.3.4a)

Brake lever is short but brake can still be readily applied (3.1.3c)

Clutch lever shortened. (6.2.1g)

Clutch lever shortened. (6.2.1g)