2004 Proton GEN-2

Dipswitch does not operate immediately when selected on main beam unable to maintain main beam when switch released (4.1.3 (b))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Coolant leak ()

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

front exhaust flex deteriorated

light switch stalk worn

Coolant leak water pump area recommend attention soon ()

Front Inner Brake pad(s) wearing thin (3.5.1g)

Nearside Front Lower Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt recommend attention soon (2.4.G.2)

Nearside Rear Lower Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt recommend attention soon (2.4.G.2)

Oil leak engine area ()

Rear Inner Brake pad(s) wearing thin (3.5.1g)

exhaust system deteriorated

o/s/f tyre worn on the inner tread area

sill covers fitted obscuring outer sill areas

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch end of sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch end of sill (2.4.A.3)

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front slow to retract

Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Direction indicators slightly discoloured (1.4.A.2f)

Engine covers fitted obscuring some components in the engine bay

Offside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Nail in offside rear tyre

Nearside Rear Brake cable has wires broken but is not significantly weakened (3.5.1b)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear rear brake fluctuating, but not excessively (3.7.B.3)

osr inner position light inop

Brake pedal anti-slip provision incomplete (3.3.A.1b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Nail in offside rear tyre

Nearside Rear Brake cable has wires broken but is not significantly weakened (3.5.1b)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear rear brake fluctuating, but not excessively (3.7.B.3)

osr inner position light inop

Offside Rear Anti-roll bar fractured (2.4.G.1)

o/s/r door will not open from inside or outside

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Stop lamp not working (1.2.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

o/s/r door will not open from inside or outside

Offside Stop lamp not working (1.2.1b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside front brake juddering slightly (3.7.A.2b)

Offside front brake juddering slightly (3.7.A.2b)