2007 Kawasaki Er 650 A7F

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Headlamp aim too low (4.1.2 (a))

Headlamp insecure (4.1.1 (c))

Offside Front Footrest insecure Locking device missing (6.2.12 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust noisy (8.1.1 (a))

Rear Tyre worn close to the legal limit 1.2mm (5.2.3 (e))

Front Brake disc contaminated (1.1.14 (b))

Front Brake pad(s) contaminated (1.1.13 (b))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Front Tyre tread depth is below minimum requirements of 1.0mm 0.7mm (5.2.3 (e)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Rear Tyre worn close to the legal limit 1.2mm (5.2.3 (e))

Steering headbearing has slight free play (2.2.2 (f) (i))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Offside Direction indicator flashing more than 120 times per minute (1.5.1c)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain worn but not considered excessive (6.2.1e)

Rear Brake disc(s) slightly worn (3.2.A1l)

both tight and loose spots in drive chain.

Drive chain excessively loose (6.2.1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain slightly tight (6.2.1d)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear suspension bush has slight free play (2.4.A2a(i))

Rear wheel bearings have slight free play (2.4.A.2c)