2011 Lexus Is 250 Advance Auto

Nearside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake pipe corroded, covered in grease or other material both (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear brake pipes have slight corrosion

Rear bumper damaged not likely to come away

Nearside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Nearside Rear bumper damaged not likely to cause injury

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust emissions - engine idle speed too high aborted test (8.2.1.2 (e))

Nearside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Nearside Rear bumper damaged not likely to cause injury

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Rear Brake pipe corroded, covered in grease or other material corroded slightly (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front Registration plate inscription illegible (0.1 (b))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Parking brake: efficiency below requirements (3.7.B.7)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components