2002 Sym Shark

Direction indicators not working (1.5.1c)

Front Brake lever cannot be applied smoothly (3.1.3d)

Headlamp aim too high (1.6)

Horn not working (1.7.3a)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Registration plate character(s) likely to be misread (6.3.4b)

Registration plate character(s) not correctly formed (6.3.4b)

Registration plate incorrect (6.3.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Brake hose slightly chafed (3.2.B3a)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) close to minimum limit borderline (3.2.A1f(i))

Lower Motorcycle structure slightly corroded (6.1.1a)

Rear Brake component damaged but not seriously reduced in strength lever bracket borderline pivot bolt tight but not fully in (3.2.A1)

Rear brake adjusted up almost fully?

Rear spring corroded but not seriously weakened (2.4A1b(ii))

Rear tyre has no pressure

number plate damaged but legible

Front Tyre worn close to the legal limit (4.1.3(ii))

Centre Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Centre Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)