2008 Kymco Super 9

Front Brake disc(s) is excessively distorted (3.2.A1m)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front position lamp damaged and function impaired (1.1.1b)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Rear Lower Fairings insecure and likely to impede the steering (2.1.2e)

Rear Tyre fouling another component (4.1.4)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Riders seat insecure (6.2.1a)

Steering headbearing has excessive free play (2.2.2)

Rear Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Upper Fairings insecure but not likely to impede the steering (2.1.2e)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Upper Fairings insecure and likely to impede the steering (2.1.2e)

Headlamp aim too high (1.6)

Horn not working (1.7.3a)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Fairings insecure and likely to impede the steering (2.1.2e)

Rear Lower Fairings insecure and likely to impede the steering (2.1.2e)

Rear Tyre fouling another component (4.1.4)

Lower Fairings insecure but not likely to impede the steering (2.1.2e)

Nearside Fairings insecure but not likely to impede the steering (2.1.2e)

Offside Rear Fairings insecure but not likely to impede the steering (2.1.2e)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Exhaust slightly deteriorated (7.1.1a)

Front suspension has a slightly reduced damping effect (2.3.6c)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Offside Front Front shock absorber has light misting of stanchion (2.3.3)

Front Horn not working (1.7.3a)

Offside Front Front shock absorber has light misting of stanchion (2.3.3)

advise o rear brake lever travel

Front Brake lever cannot be applied smoothly (3.1.3d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear reflector on motorcycle missing (1.4.1)

Steering headbearing has excessive free play (2.2.2)

Front Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)

Front Tyre worn close to the legal limit (4.1.3(i))

advise o rear brake lever travel

note front tyre side walls are cracking

Front Brake lever is bent and the brake cannot be readily applied (3.1.3c)