2013 Honda CBF125

Clutch cable frayed

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Drive chain worn to excess (6.1.7 (c) (i))

Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Clutch cable frayed

Extremely low engine oil

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Headlamp light intensity severely reduced beam flickers (4.1.4 (a))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Chain guard missing

Headlamp switch does not immediately illuminate all dipped beam headlamps (4.1.3 (a))

bolt missing from front mudguard

Steering headbearing has slight free play (2.2.2 (f) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Rear reflector missing (4.8.2 (a) (ii))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Stop lamp switch does not operate in accordance with the requirements (4.3.2 (a) (i))

R/H Chain Adjuster broken off

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))