2014 Honda CBR125

Front Brake lever is short but brake can still be readily applied end snapped off (1.1.2 (d))

Front Wheel bearing has slight play bearing feels slightly rough (5.1.3 (a) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

fuel cap seal perished/cracking

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Rear Position lamp not working (4.2.1 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Brake lever is short but brake can still be readily applied end snapped off (1.1.2 (d))

Front Wheel bearing has slight play bearing feels slightly rough (5.1.3 (a) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

fuel cap seal perished/cracking

Drive chain excessively loose (6.1.7 (c) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Headlamp aim too low (4.1.2 (a))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Pillion seat insecure (6.2.6 (a) (ii)) DANGEROUS

Rear Brake binding but not excessively (1.2.1 (f))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Drive chain slightly loose (6.1.7 (c) (i))

Rear Wheel alignment slightly misaligned (2.4 (a))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Nearside Handlebar deformed (2.1.1b)

Nearside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls (2.1.2b)

Offside Handlebar deformed (2.1.1b)

Offside Rear Footrest missing (6.2.1a)

Offside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls (2.1.2b)

Rear Brake fluid reservoir insecurely mounted (3.2.B1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

exhaust heat shield loose

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)