MOT Status
ValidMileage
10,932 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Headlamp aim too low (4.1.2 (a))
Nearside Headlamp aim too high (1.6)
Offside Headlamp aim too high (1.6)
slight lift in rear suspenion bushes.
Offside Front Headlamp aim too low (1.6)
slight lift in rear suspenion bushes.
How Reliable is the Yamaha FZ1S?
Based on 15,127 MOT tests across 1,279 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
RE06 CNC is a 2006 Yamaha FZ1S in Silver with a 998cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 82.4%.
Across all 2006 Yamaha FZ1S models, the average MOT pass rate is 89.6% with a typical mileage of 19,177 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Yamaha FZ1S fails its MOT is tyre tread depth is below minimum requirements of 1.0mm, accounting for 88 recorded failures. If you're considering buying RE06 CNC, it's worth having these areas checked by a mechanic before committing.
The Yamaha FZ1S typically stays on UK roads for around 20 years. At 20 years old, this Yamaha FZ1S is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of RE06 CNC?
You can check the full history of RE06 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was RE06 CNC registered?
RE06 CNC is a 2006 Yamaha FZ1S, first registered on 10 April 2006.
Is RE06 CNC safe to buy?
The MOT history for RE06 CNC shows 17 tests with a 82.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does RE06 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on RE06 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.