1998 Honda CBR1000F

Drive chain slightly loose (6.1.7 (c) (i))

Wheel alignment slightly misaligned (2.4 (a))

Front Position lamp not working (4.2.1 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Wheel alignment slightly misaligned (2.4 (a))

Headlight has had tape applied to correct the beam pattern

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Headlight has been taped to achieve correct beam pattern

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Slight play in rear cush drive rubber

Front Tyre worn close to the legal limit (5.2.3 (e))

Offside Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear Brake disc(s) slightly worn (3.2.A1l)

Tyres worn

L/h silencer corroding at joining point

Exhaust corroding at joining point

Wheel alignment slightly out.Exhaust corroding underneath

Exhaust is leaking but is not excessively noisey (7.1.1b)

Headlamp masks/converters fitted

Headlamp masks/converters fitted

Front Tyre worn close to the legal limit (4.1.3(ii))

Headlamp masks/converters fitted

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Right hand dip beam not working

Steering movement slightly 'notchy' (2.2.1b)

Headlamp masks/converters fitted

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp masks/converters fitted

Rear Tyre worn close to the legal limit (4.1.3(ii))