1998 Suzuki DR350SE

Brake lever is short but brake can still be readily applied (3.1.3c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Clutch lever bent (6.2.1g)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) has slight run out (3.2.A1m)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Lower Rear suspension bush has slight free play (2.4.A2a(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Wheel spoke slightly loose. (4.2.1b)

Rear suspension lightly rubbing not affecting the movement of the rear suspension (2.4.A.3a)

Steering movement slightly 'notchy' (2.2.1b)

Wheel alignment slightly misaligned. (2.5.1)

clutch lever pivot bolt loose

front tyre pressure low

nearside oil pipe possible leak

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front wheel bearings are excessively rough (2.3.5b)

Horn not working (1.7.3a)

Nearside Front Direction indicator missing (1.5.1a)

Nearside Rear Direction indicator missing (1.5.1a)

Nearside Rear Footrest insecure (6.2.1a)

Offside Front Direction indicator missing (1.5.1a)

Offside Rear Direction indicator missing (1.5.1a)

Offside Rear Footrest insecure (6.2.1a)

Rear Brake linkage has abnormal movement due to maladjustment (3.2.A1i)

Registration plate insecure (6.3.1b)

Registration plate non-relective border too close to the characters (6.3.4h)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Throttle operating incorrectly (6.2.1f)

Offside Lower Front suspension assembly component cracked (2.3.1) DANGEROUS

Clutch lever bent (6.2.1g)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) has slight run out (3.2.A1m)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front wheel bearings have slight free play (2.3.5b)

Lower Rear suspension bush has slight free play (2.4.A2a(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Wheel spoke slightly loose. (4.2.1b)

Rear suspension lightly rubbing not affecting the movement of the rear suspension (2.4.A.3a)

Steering movement slightly 'notchy' (2.2.1b)

Wheel alignment slightly misaligned. (2.5.1)

clutch lever pivot bolt loose

front tyre pressure low

nearside oil pipe possible leak

Exhaust noisy (7.1.2)

Throttle operating incorrectly (6.2.1f)

Front Direction indicator missing (1.5.1a)

Front Tyre is unsuitable (4.1.1)

Rear Direction indicator missing (1.5.1a)

Rear Footrest insecure (6.2.1a)

Rear Tyre is unsuitable (4.1.1)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear reflector on motorcycle missing (1.4.1)

Registration plate character(s) not correctly formed (6.3.4b)

Exhaust noisy (7.1.2)