1998 Gilera Runner

Front Brake disc(s) is excessively distorted (3.2.A1m)

Front Roller brake test indicates a severely grabbing brake (3.3.A1b)

Mirror lens missing

Speedo cable broken and not connected

Brake lever has inadequate reserve travel (3.1.3b)

Direction indicator not working (1.5.1c)

Exhaust is leaking and excessively noisey (7.1.1b)

Front suspension has excessive stiffness in the suspension movement. (2.3.6b)

Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Mirror lens missing

Speedo cable broken and not connected

speedo not working

Front Direction indicator affected by the operation of another lamp (1.5.1c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Horn sounds harsh or grating (1.7.3c)

Rear Direction indicator affected by the operation of another lamp (1.5.1c)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear suspension bearing excessively deteriorated (2.4A.2a(i))

Rear suspension bearing has excessive free play (2.4.A2a(i))

Rear suspension bush excessively deteriorated (2.4.A2a(i))

Rear suspension bush has excessive free play (2.4.A2a(i))

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

battery circuit not working causing problems with electrical system

speedo not working

Exhaust noisy (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake lever has inadequate reserve travel (3.1.3b)

Exhaust noisy (7.1.2)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Fuel cap sealing washer missing (7.2.2c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))