MOT Status
ValidMileage
177,392 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
All four wheel arches corroded
Engine coolant leak
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
General corrosion underneath
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Registration plate insecure but not likely to fall off (0.1 (a))
Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill not fully welded (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill not fully welded (5.3.6 (a) (i))
Offside Front Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Vehicle structure is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached Rear crossmember (6.1.6 (i) (ii)) DANGEROUS
All four wheel arches corroded
Engine coolant leak
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
General corrosion underneath
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Registration plate insecure but not likely to fall off (0.1 (a))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting as marked (6.2.2 (d) (i))
Central Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Central Oil leak, but not excessive (8.4.1 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Rear Coil spring corroded both (5.3.1 (b) (i))
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Central Oil leak, but not excessive (8.4.1 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Rear Coil spring corroded both (5.3.1 (b) (i))
Nearside Front Direction indicator not working (4.4.1 (a) (ii))
Nearside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill/subrame area (6.2.2 (d) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))
unable to test rear seatbelts due to load
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))
unable to test rear seatbelts due to load
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced To nsrear inner sill (6.1.1 (c) (i))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced To nsrear outer sill (6.1.1 (c) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch (6.1.1 (c) (i))
Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced To osrear inner sill (6.1.1 (c) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced To osrear outer sill (6.1.1 (c) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Out rigger (6.1.1 (c) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch (6.1.1 (c) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Rear Brake pad(s) wearing thin (3.5.1g)
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Exhaust emits excessive smoke or vapour of any colour (7.4.B.4)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Stop lamp not working (1.2.1b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Child seat fitted not allowing full inspection of adult belt
Brake pedal anti-slip provision missing (3.3.A.1b)
Offside Front Shock absorber has a serious fluid leak (2.7.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
Child seat fitted not allowing full inspection of adult belt
Emissions not tested (7.0)
Exhaust has a major leak of exhaust gases (7.1.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Trailer electrical socket (13 pin) not operating the trailer lamps as intended (1.9.4)
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R34 SFH is a 2010 Mazda Bongo in Blue with a 2,490cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 51.9%.
Across all 2010 Mazda Bongo models, the average MOT pass rate is 66.7% with a typical mileage of 135,155 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying R34 SFH, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 16 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of R34 SFH?
You can check the full history of R34 SFH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R34 SFH registered?
R34 SFH is a 2010 Mazda Bongo, first registered on 11 August 2010.
Is R34 SFH safe to buy?
The MOT history for R34 SFH shows 27 tests with a 51.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R34 SFH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R34 SFH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.