1998 Honda Africa Twin

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake linkage clevis joint slightly worn (3.2.A1d)

Rear suspension bearing has slight free play (2.4.A2a(i))

Horn sounds harsh or grating (1.7.3c)

Rear Brake caliper(s) securing bolt(s) loose (3.2.A1j)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake linkage clevis joint slightly worn (3.2.A1d)

Registration plate dirty (6.3.1d)

Exhaust mounting missing (7.1.1c)

Front Floor brake test indicates a binding brake (3.3.C2c)

Offside Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Chain guard missing

Rear Tyre worn close to the legal limit (4.1.3(ii))

both bar end weights loose

Front Brake disc(s) slightly pitted (3.2.A1l)

Rear Brake disc(s) slightly scored (3.2.A1l)

Wheel alignment slightly misaligned. (2.5.1)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake hose which buldges (3.2.B4)

Rear Rear wheel bearings have excessive free play (2.4.A.2c)

Rear Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Front wheel bearings have excessive free play (2.3.5b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))