2007 Sym Jet

fairings damaged /cable tied/taped on

centre stand not fully return

fairing damaged

indicaters taped in

Nearside Front Direction indicator insecure (4.4.1 (c) (i))

Offside Front Direction indicator insecure (4.4.1 (c) (i))

Offside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Headlamp aim too low (4.1.2 (a))

Motorcycle structure joining/attachment plate or fastening insecure Centre stand insecure and dragging along floor. (6.1.1 (b) (i))

Rear Shock absorber has a serious fluid leak (5.3.2 (b))

Nearside Front Direction indicator insecure (4.4.1 (c) (i))

Offside Front Direction indicator insecure (4.4.1 (c) (i))

Offside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Tyre not fitted in accordance with side wall instructions fitted wrong way round (5.2.3 (i))

Front Tyre has a tear caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Front tyre badly split but no cord exposed

slight bind on front wheel

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Tyre has ply or cord exposed (5.2.3 (d) (ii)) DANGEROUS

Front tyre badly split but no cord exposed

slight bind on front wheel

Both tyres cracking in sidewalls.

Brake hose in sleeves not allowing a full inspection of hose.

Brake lever is bent but brake can still be readily applied both (3.1.3c)

Exhaust system showing signs of corrosion.

Rear Brake lever pivots slightly worn (3.1.3a)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Tyre not fitted in accordance with side wall instruction/s flat (4.1.2e)

Throttle operating incorrectly sticking (6.2.1f)

Both tyres cracking in sidewalls.

Brake hose in sleeves not allowing a full inspection of hose.

Brake lever is bent but brake can still be readily applied both (3.1.3c)

Exhaust system showing signs of corrosion.

Rear Brake lever pivots slightly worn (3.1.3a)

Front Brake lever pivots slightly worn (3.1.3a)

Rear Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Brake lever pivots slightly worn (3.1.3a)

Rear tyre cracking across tread.

Brake lever pivots slightly worn Both (3.1.3a)

Front tyre splitting on sidewall.

Brake lever pivots slightly worn (3.1.3a)

Engine covers fitted obscuring some components in the engine bay