MOT Status
ValidMileage
18,018 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))
Exhaust noisy (8.1.1 (a))
Rear Brake pad(s) close to minimum limit (1.1.13 (a))
Exhaust noisy (8.1.1 (a))
Exhaust noisy (8.1.1 (a))
Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)
How Reliable is the Kawasaki VN1600?
Based on 5,422 MOT tests across 453 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
PO55 CNC is a 2005 Kawasaki VN1600 in Black with a 1,552cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 94.1%.
Across all 2005 Kawasaki VN1600 models, the average MOT pass rate is 89.4% with a typical mileage of 15,876 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Kawasaki VN1600 fails its MOT is tyre tread depth is below minimum requirements of 1.0mm, accounting for 47 recorded failures. If you're considering buying PO55 CNC, it's worth having these areas checked by a mechanic before committing.
The Kawasaki VN1600 typically stays on UK roads for around 23 years. At 21 years old, this Kawasaki VN1600 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of PO55 CNC?
You can check the full history of PO55 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was PO55 CNC registered?
PO55 CNC is a 2005 Kawasaki VN1600, first registered on 30 November 2005.
Is PO55 CNC safe to buy?
The MOT history for PO55 CNC shows 17 tests with a 94.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does PO55 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on PO55 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.