2011 Sym AD12W Jet 4 125

Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS

Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Front front flexi hose upper insecure.

Nearside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Nearside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear brake leaver slight movement

Front mudguard slight movement

Brake pad(s) close to minimum limit need changing soon (1.1.13 (a))

front mug guard slightly damaged

front upper fairing slightly loose

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front suspension assembly component excessively bent (2.3.1)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre fouling another component (4.1.4)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Front suspension assembly component excessively bent (2.3.1)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

engine running fast on tickover

Front Brake lever has inadequate reserve travel (3.1.3b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front Roller brake test indicates a slightly grabbing brake (3.3.A1b)