2003 Yamaha YZF1000

Drive chain excessively loose (6.1.7 (c) (i))

Headlamp aim too low both (4.1.2 (a))

Offside Direction indicator not working both (4.4.1 (a) (ii))

Rear Footrest missing both (6.2.12 (a))

Front Drive chain sprocket so worn it is likely to fail 1 tooth broken (6.1.7 (c) (ii)) DANGEROUS

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Lower Shock absorber slightly loose bolt (5.3.2 (a) (i))

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Registration plate incorrect (0.1 (c))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Stop lamp does not emit a steady light (1.3.1b)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Offside exhaust fouling on swingarm

Rear reflector on motorcycle missing (1.4.1)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain slightly loose (6.2.1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim beam image kick up to the offside (1.6)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Floor brake test indicates a binding brake (3.3.C2c)

Drive chain slightly tight (6.2.1d)

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Tyre worn close to the legal limit (4.1.3(ii))