2016 Ajs Jsm

Drive chain slightly tight (6.1.7 (k) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Front Drive chain sprocket worn to excess (6.1.7 (c) (i))

Front Shock absorber has a serious fluid leak both (5.3.2 (b))

Rear reflector missing (4.8.2 (a) (ii))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Central Front Headlamp not working on main beam (4.1.1 (a) (ii))

Central Rear Rear reflector missing (4.8.2 (a) (ii))

Central Rear Registration plate does not conform to the specified requirements (0.1 (d))

Central Rear Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Central Rear Upper Stop lamp not working (4.3.1 (a) (ii))

Nearside Front Upper Brake servo defective or ineffective (1.1.10 (a) (i))

Nearside Lower Brake pedal is so short that the brake cannot be readily applied (1.1.2 (d))

Central Rear Upper Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Nearside Front Shock absorber has a light misting of oil fork seal (5.3.2 (b))

Nearside Front Upper over filled master front reservoir

rear wheel not in line

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Stop lamp not working (4.3.1 (a) (ii))

All direction indicators not working (4.4.1 (a) (ii))

All position lamps not working (4.2.1 (a))

Horn not working (7.7 (a) (ii))

Rear Wheel alignment slightly misaligned (2.4 (a))

Front Wheel bearing has slight play (5.1.3 (a) (i))