2003 Honda XR400R

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

No lights fitted at time of test

No lights fitted at time of test

Registration plate does not conform to the specified requirements (0.1 (d))

Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Wheel spoke slightly loose. Several spokes slightly loose. (4.2.1b)

Rear Rear wheel bearings have slight free play (2.4.A.2c)

Upper Rear suspension bush has slight free play Rear shock mount worn. (2.4.A2a(i))

Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Wheel spoke excessively loose (4.2.1b)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Wheel spoke excessively loose (4.2.1b)

Rear position lamp obscured more than 50% (1.1.1d)

Stop lamp obscured (1.3.1c)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

An item not tested (Manual)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Headlamp aim not tested (1.6)

Horn not working (1.7.3a)

Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a) DANGEROUS