2008 Mazda Bongo

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Rear Anti-roll bar damaged but not seriously weakened (5.3.3 (b) (i))

Headlamp aim not tested (4.1.2 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Crossmember (6.1.1 (c) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Vehicle structure excessively corroded within 30cm of towbar mounting Crossmember (6.1.6 (i) (i))

Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Fuel system component leaking Fuel pump area (6.1.3 (b) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Crossmember (6.1.1 (c) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting Crossmember (6.1.6 (i) (i))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill inner and outer rear (6.1.1 (c) (i))

Offside Rear Rear fog lamp lens defective such that emitted light is adversely affected Not red (4.5.1 (b) (ii))

Offside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

1/ underbody covered in underseal

Rear Brake pad(s) wearing thin Both (1.1.13 (a) (ii))

Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Front Body panel corroded and likely to cause injury Outer wing (6.2.1 (a) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch area (5.3.6 (a) (i))

Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross member/radiator support area (5.3.6 (a) (i))

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Body panel corroded and likely to cause injury Quarter panel/bumper area (6.2.1 (a) (i))

Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross member/radiator support area (5.3.6 (a) (i))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill area (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch area/sill, been bodged/covered with sealant/seam sealer (5.3.6 (a) (i))

Windscreen wiper does not clear the windscreen effectively Both front (3.4 (b) (ii))

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure Exposing cords/ply of tyre (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure Exposing cords/ply of tyre (5.2.3 (d) (ii)) DANGEROUS

Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both rear lower bushes (5.3.4 (a) (i))

Offside Rear Nail in tyre ()

Prop shaft joint worn, but not excessively Rear prop shaft rear joint (6.1.7 (c) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Suspect that offside outer and inner sill is full of body filler

Underside of vehicle is heavily covered in wax oil

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch/sill end (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills (5.3.6 (a) (i))

Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sills and inner (7.1.1 (a) (i))

Steering rack gaiter missing or no longer prevents the ingress of dirt both split (2.1.3 (g) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Main beam 'tell-tale' not working permanently on (1.7.4c)

Nearside Front Headlamp aim not tested (1.8.A.1c)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Headlamp not working on main beam (1.7.5a)

Offside Front Headlamp aim not tested (1.8.A.1c)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Seat belt anchorage prescribed area is excessively corroded at outer cill (5.2.6)

Centre Rear Vehicle structure excessively corroded within 30cm of towbar mounting panel areas (6.6.6)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Lower Suspension component mounting prescribed area is excessively corroded inner sill/chassis areas (2.4.A.3)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Inner Vehicle structure excessively corroded within 30cm of towbar mounting sill panel areas (6.6.6)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill panel areas (2.4.A.3)

Offside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill panel areas (2.4.A.3)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Upper Suspension component mounting prescribed area is excessively corroded chassis areas (2.4.A.3)

Parking brake: efficiency below requirements (3.7.C.1b)

Service brake: efficiency below requirements (3.7.C.1a)

Nearside front brake binding (3.7.B.1) DANGEROUS

Front wipers not tested

Nearside Outer sill panel areas

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive arch panel areas (2.4.A.3)

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive arch panel areas (2.4.A.3)

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill panel areas (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit and underinflated (4.1.E.1)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive arch panel areas (2.4.A.3)

Offside Rear Inner Vehicle structure slightly corroded within 30cm of towbar mounting sill panel areas (6.6.6)

Offside Rear Lower Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive arch panel areas (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

underbody corrosion

brake performance not tested due nearside front brake bind

Child seat fitted not allowing full inspection of adult belt

Front Lower Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Rear Upper Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Offside Rear Upper Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

advise front inner arch liners fitted (unable to inspect front inner arch panels for corrosion)

advise underbody corrosion

Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Upper Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Inner Front Lower Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)

Offside Rear Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)

Offside Rear Anti-roll bar insecure (2.4.G.1)

Offside Rear Anti-roll bar missing (2.4.G.1)

Offside Rear Rear fog lamp emits a light other than red (1.3.2e)

Child seat fitted not allowing full inspection of adult belt

Front Lower Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Upper Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Upper Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

advise both front wipers not tested

advise front inner arch liners fitted (unable to inspect front inner arch panels for corrosion)

advise offside and nearside front outer sill panels are corroded but within prescribed areas

advise underbody corrosion

Child seat fitted not allowing full inspection of adult belt

advise nearside front outer sill panel is corroded

advise offside rear outer arch panel is corroded

advise underbody corrosion

Nearside Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Child seat fitted not allowing full inspection of adult belt

advise nearside front outer sill panel is corroded

advise offside rear outer arch panel is corroded

advise underbody corrosion

Child seat fitted not allowing full inspection of adult belt

Power steering component(s) has slight seepage from a component (2.3.3b)

Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

osr arch corroded but not excessive

rear seats folded away unable to fully check belts

Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Child seat fitted not allowing full inspection of adult belt

Power steering component(s) has slight seepage from a component (2.3.3b)

Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

osr arch corroded but not excessive

rear seats folded away unable to fully check belts

Child seat fitted not allowing full inspection of adult belt

Oil leak

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Power steering component(s) leaking (2.3.3b)

Child seat fitted not allowing full inspection of adult belt

Oil leak

Child seat fitted not allowing full inspection of adult belt

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Child seat fitted not allowing full inspection of adult belt

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear fog lamp tell tale not working (1.3.1b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear fog lamp tell tale not working (1.3.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)