2004 Mazda Bongo

Brake disc worn, pitted or scored, but not seriously weakened front and back (1.1.14 (a) (ii))

Brake pipe corroded, covered in grease or other material various pipes (1.1.11 (c))

Seat belt anchorage prescribed area is corroded but not considered excessive front and back and inner and outer sills and floor area both sides (7.1.1 (a) (i))

Suspension arm corroded but not seriously weakened various arms front and back both sides (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front and back and inner and outer sills and floor area both sides (5.3.6 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened front and back (1.1.14 (a) (ii))

Brake pipe corroded, covered in grease or other material various pipes (1.1.11 (c))

Seat belt anchorage prescribed area is corroded but not considered excessive inner and outer sills and floor area both sides (7.1.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive front and back and inner and outer sills and floor area both sides (5.3.6 (a) (i))

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

This vehicle has areas of corrosion on its underside

Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Anti-roll bar attachment bracket/mounting damaged and seriously weakened (5.3.3 (b) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

This vehicle has areas of corrosion on its underside

Nearside Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner 1/4 (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Rear position lamp(s) not working (1.1.A.3b)

Nearside Rear Rear position lamp(s) not working side light (1.1.A.3b)

Nearside Front Seat belt anchorage prescribed area is excessively corroded under sill (5.2.6)

Offside Front Seat belt anchorage prescribed area is excessively corroded under sill (5.2.6)

Offside Rear Seat belt anchorage prescribed area is excessively corroded under sill (5.2.6)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front tyre tread cracked and perished

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

areas of advanced corrosion under/around vehicle.

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Rear fog lamp not working (1.3.2b)

Power steering component(s) leaking steering rack (2.3.3b)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front tyre tread cracked and perished

Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

areas of advanced corrosion under/around vehicle.

corrosion on o/s outer and n/s and o/s under sills

n/s and o/s front top strut mountings corroded

Horn not working (1.6.2a)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

corrosion on o/s outer and n/s and o/s under sills

n/s and o/s front top strut mountings corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

advise nearside rear outer arch corroded & holed outside perscribed area.

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear fog lamp not working (1.3.2b)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

advise nearside rear outer arch corroded & holed outside perscribed area.

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

advise offside cv gaiter slightly insecure!