MOT Status
ValidMileage
272,381 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Fluid leak, but not excessive steering rack (8.4.1 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Fluid leak, but not excessive steering rack (8.4.1 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Body component corroded and likely to cause injury wheel arch (6.2.1 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Body component corroded and likely to cause injury wheel arch (6.2.1 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Oil leak, but not excessive (8.4.1 (a) (i))
Hydraulic leak, but not excessive steering rack (8.4.1 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Hydraulic leak, but not excessive steering rack (8.4.1 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Inner Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Inner Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Headlamp aim too high (1.8)
Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Rear fog lamp not working (1.3.2b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Fuel system component leaking (7.2.3)
Offside front brake binding (3.7.B.1)
Brakes imbalanced across an axle (3.7.B.5b)
Fuel system component leaking (7.2.3)
Horn not working (1.6.2a)
Offside Front front brake binding (3.7.B.1)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Oil leak
Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear fog lamp missing (1.3.2a)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Oil leak
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear fog lamp missing (1.3.2a)
Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Rear fog lamp switch missing (1.3.1a)
Rear fog lamp tell tale not working (1.3.1b)
Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Oil leak
both front tyres worn on outer edges
only one jet working on n/s screenwasher
rear tyres getting low on tread
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P933 FTT is a 2008 Mazda Bongo in Black with a 2,490cc diesel engine. This vehicle has been through 30 MOT tests with a personal pass rate of 60%.
Across all 2008 Mazda Bongo models, the average MOT pass rate is 66.5% with a typical mileage of 139,328 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying P933 FTT, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 18 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P933 FTT?
You can check the full history of P933 FTT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P933 FTT registered?
P933 FTT is a 2008 Mazda Bongo, first registered on 27 February 2008.
Is P933 FTT safe to buy?
The MOT history for P933 FTT shows 30 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P933 FTT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P933 FTT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.