1996 Yamaha YP250

Rear Tyre worn close to the legal limit (5.2.3 (e))

Headlamp aim too low (4.1.2 (a))

Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Tyre worn close to the legal limit (5.2.3 (e))

surface corrosion on frame

Exhaust markings indicating not for road use or similar wording (6.1.2 (c))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Brake excessively binding (1.2.1 (f))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Motorcycle structure slightly corroded area at centre stand (6.1.1a)

Nearside Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Offside Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Motorcycle structure slightly corroded area at centre stand (6.1.1a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nearside Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Offside Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Tyre has a lump caused by separation or partial failure of its structure (4.1.2a(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Offside Rear Exhaust is leaking and excessively noisey (7.1.1b)

Rear Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))