2006 Ford Freda

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

all repair plates covered in fiberglass

power steering rack weeping from top seal

Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings cross member both sides (6.1.B.2)

Nearside Front Subframe mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Registration plate lamp not working (1.1.C.1d)

Windscreen wiper does not clear the windscreen effectively both (8.2.2)

Nearside Passenger's seat insecure (6.2.A.1) DANGEROUS

both headlight lenses cloudy and starting to affect aim patterns

coolant pipes heavily corroded on underside

exhaust getting thin

repairs to inner sill covered in filler and underseal

Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings panel under headlights going into front inner wings (6.1.B.2)

Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings cross member both sides (6.1.B.2)

Offside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Rear fog lamp not working (1.3.2b)

Registration plate lamp not working (1.1.C.1d)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen wiper does not clear the windscreen effectively both (8.2.2)

Driver's seat insecure (6.2.A.1) DANGEROUS

Nearside Passenger's seat insecure (6.2.A.1) DANGEROUS

both headlight lenses cloudy and starting to affect aim patterns

coolant pipes heavily corroded on underside

exhaust getting thin

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Front Power steering ram(s) has slight seepage from a component (2.3.3b)

reverse light inoperative

Headlamp switch faulty (1.7.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp not working on dipped beam (1.7.5a)

Rear fog lamp not working (1.3.2b)

Front Power steering ram(s) has slight seepage from a component (2.3.3b)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

rear wiper split

reverse light inoperative

both headlights in poor condition

Battery insecure (1.9.1)

Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Registration plate lamp not working (1.1.C.1d)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

both headlights in poor condition

damp around base of steering column

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Horn not working (1.6.2a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar linkage damaged and seriously weakened (2.4.G.1)

Offside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)

Rear Rear fog lamp not working (1.3.2b)

Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Rear fog lamp not working (1.3.2b)

Rear Registration plate lamp not working (1.1.5c)