2010 Mazda Friendee

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill (6.1.1 (c) (i))

Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill (6.1.1 (c) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill (6.1.1 (c) (i))

Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill end cap (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear Vehicle structure excessively corroded within 30cm of towbar mounting cross member various places (6.1.6 (i) (i))

Steering column universal joint has excessive wear or play lower joint (2.2.2 (c))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear spring mountings starting to corrode

both head light beam images becoming poor

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Central Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Slight Corrosion To Underside Of Vehicle

Brake performance not tested due to brake pipe leaking (1.2.1 (g))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced in arch by sill end cap (6.1.1 (c) (i))

Brake pipe leaking on a hydraulic braking system front to rear by rear hose to axle (1.1.11 (b) (ii)) DANGEROUS

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

slight corrosion to vehicle under side

Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Service brake excessively binding (1.2.1 (f))

Rear Exhaust has a minor leak of exhaust gases box (6.1.2 (a))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

rear body panal holed

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

rear body panal holed

Front Service brake binding but not excessively nearside & offside front brakes binding slightly (1.2.1 (f))

Nearside Rear Exhaust has a minor leak of exhaust gases minor leak from catalytic converter (6.1.2 (a))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill slightly corroded & getting weak (5.3.6 (a) (i))

Offside Rear rear body panel located behind rear bumper corroded

Central Front bumper damaged

Front Service brake binding but not excessively nearside & offside front brakes binding slightly (1.2.1 (f))

Nearside Front drop link upper ball joint cover slightly deteriorated

Nearside Rear Nail in tyre ()

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced body section located behind rear bumper corner corroded (6.1.1 (c) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside SILL CORRODED

Central Rear Statutory seat belt missing CLASP (5.1.1)

Central Stop lamp not working HIGH LEVEL (1.2.1b)

Nearside Front Anti-roll bar has excessive play in a ball joint DROP LINK (2.4.G.2)

Nearside Rear Anti-roll bar has excessive play in a pin/bush DROP LINK (2.4.G.2)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D BUSH (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded SILL (2.4.A.3)

Offside Front Steering component mounting prescribed area is excessively corroded CROSS MENBER (2.2.C.1h)

Offside Front Suspension component mounting prescribed area is excessively corroded CROSS MENBER (2.4.A.3)

Offside Rear Anti-roll bar has excessive play in a pin/bush DROP LINK (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D BUSH (2.4.G.2)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded SILL (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded SILL (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside SILL CORRODED

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush D Bush (2.4.G.2)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush D Bush (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement Drop Link (2.4.G.2)

Front Oil leak Top of Engine ()

Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Rear Both Diff seals leaking

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear fog lamp insecure (1.3.2a)

Rear fog lamp not working (1.3.2b)

Nearside Front Body has a sharp edge caused by damage (6.1.C.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Body has slight corrosion (6.1.B.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc slightly pitted (3.5.1h)