1996 Yamaha XV250

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

Brake clevis joint insecure rear brake anchor bar loose and no locking device fitted (1.1.15 (c))

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

Rear Brake pedal cannot be released smoothly pedal return system inoperative, pedal stays down (3.1.3d)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Offside Rear Direction indicator insecure (1.5.3b)

Rear Brake reaction bracket securing bolt(s) loose (3.2.A1j)

Rear Tyre worn close to the legal limit (4.1.3(ii))

all spokes slightly corroded

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain worn to excess (6.2.1e)

Exhaust is leaking and excessively noisey (7.1.1b)

Nearside Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Nearside Brake pad(s) contaminated by oil or grease (3.2.A1k)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Throttle operating incorrectly (6.2.1f)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil (2.3.3)