1997 Triumph Speed

Front Brake binding but not excessively (1.2.1 (f))

Rear SUSPENSION LINKAGE BEARING NOT MOVING FREELY

Throttle operating incorrectly (6.2.7 (a) (i))

Rear SUSPENSION LINKAGE BEARING NOT MOVING FREELY

Front Tyre worn close to the legal limit (4.1.3(ii))

Front wheel bearings have slight free play (2.3.5b)

Rear wheel bearings have slight free play (2.4.A.2c)

Brake pedal pivots slightly worn (3.1.3a)

Rear wheel bearings have slight free play (2.4.A.2c)

slight play in front floating discs and front pads.

Brake performance not tested (3.3)

Offside Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Plate brake test Neither brake control achieves an efficiency of 25% (3.3.B2b)

Plate brake test No brake control achieves an efficiency of 30%. (3.3.B2a)

Rear Brake disc(s) excessively scored (3.2.A1l) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Brake pedal pivots slightly worn (3.1.3a)

Rear wheel bearings have slight free play (2.4.A.2c)

slight play in front floating discs and front pads.

Brake pedal pivots slightly worn (3.1.3a)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake hose slightly kinked (3.2.B3a)

Rear Rear wheel bearings are slightly rough (2.4.A.2c)

Rear wheel bearings have slight free play (2.4.A.2c)

slight play/movement in both front floating discs.

Direction indicator flashing more than 120 times per minute (1.5.1c)

Direction indicator flashing more than 120 times per minute (1.5.1c)

Front Headlamp aim too low (1.6)

Nearside Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Nearside Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Brake pedal pivots slightly worn (3.1.3a)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake hose slightly kinked (3.2.B3a)

Rear Rear wheel bearings are slightly rough (2.4.A.2c)

Rear wheel bearings have slight free play (2.4.A.2c)

slight play/movement in both front floating discs.

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear suspension bearing excessively deteriorated (2.4A.2a(i))

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Brake pedal is bent and the brake cannot be readily applied (3.1.3c)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)