1996 Mazda MPV

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d-bush (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Emissions unable to be completed exhaust not connected in various locations (8.2.2.2 (e))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d-bush (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d-bush (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d-bush (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Horn not working (7.7 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer/inner sill join (5.3.6 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d-bush (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d-bush (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

front prop shaft missing

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Exhaust has a major leak of exhaust gases rear silencer (6.1.2 (a))

Offside Rear Rear fog lamp does not emit a steady red light (4.5.4 (a))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Prop shaft joint so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

front prop shaft missing

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Rear fog lamp does not emit a steady red light (4.5.4 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords on the outer side wall (5.2.3 (d) (i))

Oil leak, but not excessive from engine (8.4.1 (a) (i))

Steering box leaking oil (2.1.1 (e) (i))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords on the outer side wall (5.2.3 (d) (i))

Oil leak, but not excessive from engine (8.4.1 (a) (i))

Steering box leaking oil (2.1.1 (e) (i))

Central Exhaust has a minor leak of exhaust gases (7.1.2)

Front Headlamp aim too high (1.8)

Oil leak

Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

offside front tyre wear on both edges

offside front wiper blade slightly deteriorated

Oil leak

Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

offside front tyre wear on both edges

offside front wiper blade slightly deteriorated

Offside Power steering component(s) has slight seepage from a joint (2.3.3b)

Oil leak

offside front tyre wear on outer edge

rear centre stop light not working

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Power steering component(s) has slight seepage from a joint (2.3.3b)

Oil leak

offside front tyre wear on outer edge

rear centre stop light not working

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Fuel system component leaking (7.2.3)

Horn not working (1.6.2a)

Nearside Front Brake hose twisted (3.6.B.4c)

Offside Registration plate lamp not working (1.1.C.1d)

Exhaust has a minor leak of exhaust gases (7.1.2)

rearmost seats removed at time of test

windscreen wipers poor

Nearside Rear Tie bar/rod has slight play in a pin/bush (2.4.G.2)

Rear brake disc slightly pitted (3.5.1h)

Nearside Front brake disc excessively pitted (3.5.1h)

Nearside Registration plate lamp not working (1.1.5c)

Offside Rear Tie bar/rod has excessive play in a pin/bush (2.4.G.2)

Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Stop lamp not working (1.2.1b)

Nearside Rear Tie bar/rod has slight play in a pin/bush (2.4.G.2)

Rear brake disc slightly pitted (3.5.1h)