1996 Honda Cub

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Horn not working (1.7.3a)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp aim too high (1.6)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

All position lamps adversely affected by the operation of another lamp (1.1.3b)

Direction indicators affected by the operation of another lamp (1.5.1c)

Horn not loud enough to be heard by another road user (1.7.3a)

Registration plate incorrect (6.3.1a)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Drive chain slightly loose (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain excessively loose (6.2.1d)

Front Direction indicator affected by the operation of another lamp (1.5.1c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Rear Direction indicator affected by the operation of another lamp (1.5.1c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)