1997 Triumph Speed

Exhaust noisy (8.1.1 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Rear Brake disc fractured (1.1.14 (a) (ii)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Exhaust noisy (8.1.1 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Offside Front brake disc rotors worn

Steering movement slightly 'notchy' (2.2.1b)

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Horn not working (1.7.3a)

Nearside Front Direction indicators not working (1.5.1c)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Nearside Rear Direction indicators flashing more than 120 times per minute (1.5.1c)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Steering headbearing has slight free play (2.2.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Stop lamp remains on when the brake is released (1.3.1e)

Front brake pads need bedding in for +/- 150 miles

Front brake pads need bedding in for +/- 150 miles

Nearside Front Lower Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Nearside Rear Upper Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Offside Front Lower Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nearside Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Floor brake test indicates a binding brake (3.3.C2c)

rubber damper missing from silencer mount bracket