MOT Status
ExpiredMileage
211,323 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Anti-roll bar linkage ball joint has slight play droplink (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Coil spring corroded both (5.3.1 (b) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust has a major leak of exhaust gases CAT (6.1.2 (a))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt droplink (5.3.4 (b) (ii))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front cross member (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play droplink (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play droplink (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Coil spring corroded both (5.3.1 (b) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Power steering component(s) has slight seepage from a component rack (2.3.3b)
nearside front inner sill corroded but not in prescribed area
nearside rear tyre has slight cuts to tread but not deep enough reach cords
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Power steering component(s) has slight seepage from a component rack (2.3.3b)
nearside front inner sill corroded but not in prescribed area
nearside rear tyre has slight cuts to tread but not deep enough reach cords
Spare tyre defective ()
Engine covers fitted obscuring some components in the engine bay
N/S/F Body has excessive corrosion not within 30cm of a body mount
Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Oil leak
Rear Brake pad(s) wearing thin (3.5.1g)
Under-trays fitted obscuring some underside components
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Battery insecure (1.9.1)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Back box heavily corroded
Engine covers fitted obscuring some components in the engine bay
N/S/F Body has excessive corrosion not within 30cm of a body mount
Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Oil leak
Rear Brake pad(s) wearing thin (3.5.1g)
Under-trays fitted obscuring some underside components
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
exhaust system has slight corrosion
all four tyres slightly cracked
both wipers slightly deteriorated
nearside door mirror broken
Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Front Brake hose excessively damaged (3.6.B.4d)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Stop lamp not working (1.2.1b)
Rear fog lamp does not emit a steady red light (1.3.2e)
Stop lamp has less than 50% of the light sources illuminating (1.2.1b)
All tyres cracking and deteriorating in tread.
Nearside steering rack boot damp.
Offside door mirror glass damaged.
Rear brake discs rusty.
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Front Exhaust system not adequately supported (7.1.1)
Rear Rear fog lamp slightly discoloured (1.3.2e)
front a/roll bar links have the top joint boots torn.
Rear Rear fog lamp slightly discoloured (1.3.2e)
front a/roll bar links have the top joint boots torn.
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P481 ECE is a 2010 Mazda Bongo in Blue with a 2,500cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 68.8%.
Across all 2010 Mazda Bongo models, the average MOT pass rate is 66.7% with a typical mileage of 135,155 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying P481 ECE, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 16 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P481 ECE?
You can check the full history of P481 ECE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P481 ECE registered?
P481 ECE is a 2010 Mazda Bongo, first registered on 1 February 2010.
Is P481 ECE safe to buy?
The MOT history for P481 ECE shows 16 tests with a 68.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P481 ECE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P481 ECE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.