2006 Ford Freda

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced panel (6.1.1 (c) (i))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced corner panel behind bumper (6.1.1 (c) (i))

Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Windscreen washer not working (3.5 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Power steering pipe/hose has slight seepage rack (2.1.5 (a))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

corrosion inner sills

discs rusty on edge front

small holes o/s/f inner sill not within failure criteria

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Tyre tread depth below requirements of 1.6mm scrubbed in to centre 3/4 (5.2.3 (e)) DANGEROUS

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

corrosion inner sills

discs rusty on edge front

small holes o/s/f inner sill not within failure criteria

Front Headlamp has a product on the lens but not seriously reducing light output both lenses (4.1.4 (b))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

all tyres perishing and cracking

n/s and o/s inner sills and o/s outer sill corroded o/s/f inner sill x2 holes not within 30cm of failure criteria.

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Headlamp has a product on the lens but not seriously reducing light output both lenses (4.1.4 (b))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

all tyres perishing and cracking

n/s and o/s inner sills and o/s outer sill corroded o/s/f inner sill x2 holes not within 30cm of failure criteria.

Rear Tyre obviously under inflated (5.2.3 (l))

corrosion in various places

slight play in neaside front drop link

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

offside rear tyre cracking

oil leak

play in nearside front drop link

both front track rod end gaitors split

corroison in various places

oil leak

corrosion in various places

front brake judder

play in nearside front drop link

corrosion in various places

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Emissions not tested (7.4.B.1)

Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

corroison in various places

Exhaust has a major leak of exhaust gases (7.1.2)

Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Anti-roll bar insecure (2.4.G.1)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Parking brake lever has no reserve travel (3.1.6b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

off side front tyre worn on inner edge

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

nearside and offside rear tyres perished

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too low (1.8)