2010 Triumph Sprint

Exhaust noisy (8.1.1 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Exhaust noisy (8.1.1 (a))

Drive chain worn to excess (6.1.7 (c) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Clutch lever bent (6.2.7 (b))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake binding but not excessively (1.2.1 (f))

Clutch lever bent (6.2.7 (b))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Lower Exhaust has a major leak of exhaust gases (6.1.2 (a))

Clutch lever bent (6.2.7 (b))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Clutch lever bent (6.2.7 (b))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Motorcycle structure joining/attachment plate or fastening insecure (6.1.1 (b) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e))

Rear reflector missing (4.8.2 (a) (ii))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))