2006 Derbi Senda

Rear brake binding slightly

Steering headbearing has slight free play (2.2.2)

Rear brake binding slightly

Rear reflector on motorcycle missing (1.4.1)

Steering headbearing has slight free play (2.2.2)

Brake lever is short but brake can still be readily applied (3.1.3c)

Clutch lever shortened. (6.2.1g)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Rear reflector on motorcycle missing (1.4.1)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Brake lever is short but brake can still be readily applied (3.1.3c)

Clutch lever shortened. (6.2.1g)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Direction indicators not working (1.5.1c)

Front Brake disc(s) securing bolt(s) missing (3.2.A1g)

Front Tyre tread not clearly visible (4.1.3(i))

Headlamp aim beam image kick up to the offside (1.6)

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Headlamp aim too high (1.6)

Headlamp switch faulty (1.2.4)

Horn not working (1.7.3a)

Indicator tell tale not functioning (1.5.2)

Lower Rear suspension bush has excessive free play (2.4.A2a(i))

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Brake performance not tested (3.3)

Rear Brake performance not tested (3.3)

Rear position lamp insecure (1.1.1c)

Rear reflector on motorcycle missing (1.4.1)

Registration plate delaminated (6.3.1.d)

Registration plate font not substantially similar to the prescribed font (6.3.4d)

Riders seat insecure (6.2.1a)

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Brake pedal is damaged and the brake cannot be readily applied (3.1.3c) DANGEROUS

Clutch lever bent (6.2.1g)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust slightly deteriorated (7.1.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel spoke slightly loose. (4.2.1b)

Headlamp main beam warning lamp not working

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(i))

Rear spring corroded but not seriously weakened (2.4A1b(ii))

Rear suspension component slightly corroded. (2.4.A.1a)

Wheel alignment slightly misaligned. (2.5.1)

possible oil comtamination front pads?

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Brake component is severely distorted (3.1.5)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear position lamp missing (1.1.1a)

Rear wheel bearings have excessive free play (2.4.A.2c)

Wheel spoke excessively loose (4.2.1b)