2004 Honda Cbr

Clutch lever shortened lever end broken off has sharp end (6.2.7 (b))

Footrest slightly loose both footrest rubber missing completely (6.2.12 (a))

Front Brake lining(s) close to minimum limit (1.1.13 (a))

Front Mudguard insecure ()

Nearside Rear side panel and tail piece broken has jagged edge

Headlamp aim too low headlight bulb loose in headlight (4.1.2 (a))

Horn not working horn missing (7.7 (a) (ii))

Nearside Motorcycle structure joining/attachment plate or fastening insecure side stand spring missing so stand hanging down (6.1.1 (b) (i))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Clutch lever shortened lever end broken off has sharp end (6.2.7 (b))

Footrest slightly loose both footrest rubber missing completely (6.2.12 (a))

Front Brake lining(s) close to minimum limit (1.1.13 (a))

Front Mudguard insecure ()

Nearside Rear side panel and tail piece broken has jagged edge

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Direction indicator missing (1.5.1a)

Fairings insecure and likely to impede the steering (2.1.2e)

Rear Tyre valve stem slightly damaged (4.1.2c)

Registration plate insecure (6.3.1b)

front brake system slightly binding

Rear Tyre valve stem slightly damaged (4.1.2c)

front brake system slightly binding

Drive chain excessively loose (6.2.1d)

Front Floor brake test indicates a binding brake (3.3.C2c)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Drive chain sprocket worn to excess (6.2.1e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake master cylinder fluid level dangerously low (3.2.B1d)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Floor brake test indicates a sticking brake (3.3.C2c)

Drive chain excessively loose (6.2.1d) DANGEROUS

Drive chain worn to excess (6.2.1e) DANGEROUS

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Clutch lever shortened so it cannot be readily operated. (6.2.1g)

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Steering headbearing has excessive free play (2.2.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))